Take a deep breath
Pulmonary surfactant is a special fluid released by cells in the lungs. For premature babies and COVID-19 patients in intensive care, it can mean the difference between life and death. An ETH materials scientist hopes to shed some light on this complex substance.
It’s not easy to keep up with Maria Novaes Silva as she strides briskly down the corridors of Jan Vermant’s lab at ETH. One minute she’s upstairs – the next, she’s down in the windowless basement, pulling on a lab coat and preparing for her next experiment. Carefully pouring an opaque liquid into a small Perspex chamber, she immediately becomes calm and focused. “This complex fluid was obtained from the lungs of animals – it’s called pulmonary surfactant,” she says. In the course of her doctoral project, Silva hopes to gain a better understanding of this remarkable substance.
Surfactant is produced by specialised cells in the lungs. It makes breathing easier and prevents the lung’s tiny air sacs, known as alveoli, from collapsing after exhalation. Surfactant also has important medical applications. If a premature baby is born before its lungs are fully developed, it has a much lower chance of survival. One way doctors can help is by injecting surfactant into the lungs to keep them working properly. In COVID-19 patients needing a ventilator, the alveolar cells that secrete the surfactant are impaired.
Jan Vermant, ETH Professor of Soft Materials and member of the Competence Center for Materials and Processes (MaP), has frequent contact with doctors and other medical professionals. One thing he has learned from them is that mechanically ventilated patients must be induced to take a deep breath from time to time because a constant rate of ventilation causes their lung function to deteriorate. Medical experts are still exploring exactly why it is so important for the lungs to be fully inflated on a regular basis – but young parents may be comforted by the notion that their crying infant is giving its lungs a good workout!
“Taking a deep sigh from time to time is important for our breathing,” says Silva. She suspects that this is somehow related to the surface tension of the surfactant. Intermolecular forces act to minimise the surface area of a liquid, and this surface tension is also the reason why water droplets are spherical. To test her hypothesis, Silva simulates an average breathing rate with the Perspex chamber. As she does so, she also measures the surface tension of the surfactant. In an initial experiment, the air flows evenly in and out of the chamber to simulate a resting breathing rate. The surface tension in this case is 25 millinewtons per metre. “That’s pretty high, at least in a breathing context,” Silva explains. “If our lungs were always battling that level of surface tension, breathing would be exhausting!”
Materials scientist Maria Novaes Silva studies pulmonary surfactant in the lab.
Silva fills the unique apparatus with surfactant. (Photograph: Daniel Winkler)
In a second experiment, she interrupts this steady resting breathing rate with a single, larger intake of air after approximately every fourth cycle of inspiration and expiration. When regular breathing resumes, the surface tension has fallen from 25 to 15. “We think that occasional deep breaths might be an important factor in reducing surface tension and making it easier to breathe,” Silva says.
To illustrate her point, Silva has prepared a presentation in the seminar room. She explains that our airways ramify more than 20 times, continuously dividing into smaller and smaller branches – from the trachea, bronchi and bronchioles all the way down to the alveoli. At the end of this respiratory tree, the alveoli form a network of several hundred million vesicles, connected by alveolar pores. These tiny air sacs inflate during inhalation and deflate during exhalation – and they are lined with surfactant to prevent them from collapsing after exhalation.
Deeper and Deeper
Back in the lab, Silva fills a different piece of equipment with animal surfactant. It resembles a giant spider with spindly silver legs. Suspended from its body hangs a thin needle, seemingly hovering over the surfactant. There is only a handful of these systems worldwide, all of which were developed in the ETH lab. Down in the basement, Silva’s goal was to simulate natural breathing: a few gentle breaths interspersed by the occasional deep one. Here, in the upstairs lab, the simulation is designed to mimic several softer resting breaths that gradually get deeper and deeper until they become a deep sigh. These expansions and contractions cause alterations in the surface area of the surfactant. The needle measures the surface tension throughout the experiment, allowing Silva to determine what happens as breathing becomes deeper. Currently, her results suggest that this expansion of the lungs is what reduces surface tension and makes breathing easier.
“Obviously, the situation in the lungs is much more complex!” she says, almost apologetically. “But as materials scientists, our task is to characterise the individual properties of a material as precisely as possible, so we deliberately attempt to untangle the complex interplay between the various forces.”
Silva still has one more piece of test equipment to put through its paces. Under the microscope is a small ring with a hole in the middle. It is surrounded by tiny pores and filled with surfactant. Using a special device, Silva applies pressure to the liquid. As she does so, the film gets thinner and eventually breaks. “Don’t worry, that’s meant to happen!” she says, smiling. During her presentation in the seminar room, she mentioned that alveoli are connected by pores. One possibility, she says, is that the thin film of surfactant breaks during breathing. This then equalises the pressure within the alveoli via the tiny pores between the vesicles.
Inject - or Inhale?
Silva is clearly fascinated by this mysterious fluid. But her experiments with surfactant are also motivated by the search for medical applications. These include the administration of surfactant to premature infants. Although this is often delivered as an injection, there are also non-invasive approaches that involve administering the surfactant as an aerosol via a breathing mask. “We hope our research will identify parameters that can improve this method,” says Silva. “By understanding the mechanisms at work here, we can help medical experts create even better tools.”
Silva knows what she’s aiming for – and she clearly has the perseverance, motivation and energy to achieve it.
Doctoral School
The MaP Doctoral School was established in 2021 to help foster a sense of community among students from multiple disciplines. It provides leading-edge education in five thematic tracks that reflect the main areas of materials and process research at ETH Zurich. Each track includes customised activities, such as advanced seminar series, lab tours and excursions. The programme also emphasises the development of personal and transferable skills. Run by the ETH Zurich Competence Center for Materials and Processes (MaP), the Doctoral School brings together 80 research groups from 11 departments with over 600 doctoral students.
Globe Water
This text appeared in the 23/02 issue of the ETH magazine Globe.
Download Read whole issue (PDF, 2.8 MB)